Needed to Remove my Cup Holder Bezel for pics for some custom work. So I thought I would do a How-To!

First Get in the car..lol
http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17674.jpg

Then Remove the Gear Shift Bezel
http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17676.jpg

Then grab under the Console. I did back under the cup holder area. Pull up and tabs remove easily.
http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17678.jpg

There are 4 Screws to remove on each corner.
http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17679.jpg

Pull the Cup Holder off and you will see the bezel clips.
http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17680.jpg

Be very patient and they should slide off like this. I used a Flat Head Screwdriver.
http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17681.jpg

WARNING: I thought they would pull back to release because they looked they would. THEY ARE VERY FRAGILE. If you pull too far, it will snap.
http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17682.jpg

Well after all that. You will have the Bezel removed for customizing.
http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17684.jpg

http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17683.jpg

http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17685.jpg

http://i14.photobucket.com/albums/a338/customsetc/MY%20CHARGER/SNC17686.jpg

Thanks

Nick

Good write up, I was wondering how that came off

Nice write up Travis :cool:

Good to know Nick, Thanks for the pictures AND writeup!;)

Nice write-up!! That's definitely good info to have. :)