See some of you guys painting your interior parts has inspired me. How do you remove the radio bezel and shifter bezel?

Are you needing to know for the Charger or the Challenger. I think the center bezels just pull out on the charger, not sure on the Challenger though.

For the Charger.

jon,,the radio bezel just pulls off. open the ash try and start there to pull the bezel and just go slow.

Thanks, Ed. What about the shifter bezel, the painted part, not the chrome part.

ahh the shift bezel you mean the plate piece or the whole housing it sets in. if its just the plate inside the chrome piece, snap off the chrome bezel and then the plate comes out. The actual who piece thing involves removing the ashtry and then i believe the piece lifts up and off some strong clips.
Go to chargerforumz.com and there is a write up on it, its been a while since i've done mine.

I'm convinced a T20 torx screwdriver and some elbow grease is all that's required to take the whole interior out. Lol

Remove the chrome ring around the outter edge of the shifter, and just lift everything out. its held in by clips. same goes for the radio bezel

What are you planning, Jon?

Gonna do some color... not sure exactly what yet.